|
|
Pump Lift Stations
Overview
Rather than buying components and
setting them into a concrete pit, many industrial customers are
using pump lift stations in the pit to reduce installation
costs, eliminate leakage problems and corrosion issues, and
reduce maintenance costs. Any size lift station is possible,
including custom shapes with secondary containment.
Wastech Controls is an
experienced fabricator and electrical panel builder. So when our
customers ask about a pump, we can save them time and effort by offering the
whole package! For more information, check out our
standard vertical centrifugal pump lift stations (VPLS Series).
Pump lift stations are used to
move industrial liquids such as chemicals, wastewater, rinse or wash-water,
or process liquids that need to be treated before dumping into a
sewer. The pump lift station package may include a
pump control panel or just a junction box on top of the lift
station. Pump lift stations can be simplex (one pump) or duplex
(two pumps). They will always include:
- Tank and cover
- Vertical centrifugal pump
- Check valve on the discharge
- Level sensors
- Level control
- Viewing port
- Vent fitting
- Inlet fitting
- Alternating relay if duplex
|
 |
|
 |
|
 |
 |
|
Wastech's CDS
Chemical Dispense Station or Glycol Feed System automatically
dispenses metered amounts of any chemical on demand, including
viscous fluids. It comes with a NEMA 4X control panel with ON/OFF,
HOA switches and a fused receptacle. It is fully wired with all
piping, a check valve, pressure switch, and isolation valve.
Standard features include a 15, 30, 55, or 100 gallon tank with
hinged cover, and a 5.5, 8.5, 12 or 20 GPH automatic metering pump. |
Wastech engineers
help customers with assistance in sizing the pump and designing the
total solution. Call Paul Nicolas (ext. 221) or Kevin
Holm (ext. 215) directly. We will also supply engineering drawings if
requested. Wastech offers these stations in PP, PVDF, PVC, or stainless
steel, and with all types of pumps and controls.
|
|
